Idiomas disponibles
Idiomas disponibles
Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well
!
as the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
These documents must be kept in a safe place and passed
on together with the product.
Intended use
This digital electronic spirit level with 360° angle display is suitable
for aligning slopes and has a wall-line-laser to optically extend the
measuring surface. Slopes can be transferred with the reference
function.
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions
fail or the battery charge is weak.
– Switch off the device before removing the battery.
Safety instructions
Using class 2 lasers
IEC 60825-1:2014, EN 60825-1:2014/A11:2021
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying
glass, microscope, binoculars) be used to look at the laser beam
or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser
devices are in operation.
08
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
