cecotec CONGA WINDROID 1290 DOUBLESPRAY CONNECTED Manual De Instrucciones página 28

ENGLISH
- This safety system will be effective when the electric circuit fails. It provides a runtime up
to 30 min depending on the charge level.
- The window-cleaning robot will simultaneously stop and beep as the red light indicator
flashes.
- Remove the window-cleaning robot from the glass as soon as possible. You can pull
carefully from the safety rope to detach it from the glass in case you can't reach it with
your hand.
Remember
The appliance should not be left unattended while plugged to a power supply.
Window-cleaning robot's operation
App and remote control
You can switch between cleaning modes from the app or from the remote control.
Start cleaning
- Press the power button on the window-cleaning robot or the "Start cleaning" option on
the remote control or app. The window-cleaning robot chooses cleaning path "N" with the
water spray activated by default.
- You can choose between "N", "Z", or "Z+N" modes on the remote control or in the application.
Dry mode
- The window-cleaning robot can operate in every mode without activating the spray.
- The water spray will be activated by default.
Spray mode
- The water spray will be activated by default. If you deactivate it and want to activate it
again, press "Automatic water spray" on the remote control or app. The window-cleaning
robot will automatically spray in the direction it's facing: if it moves to the right, it will spray
to the right; if it moves to the left, it will spray to the left. The same applies when it moves
vertically, spraying upwards or downwards as it moves.
- If you wish to deactivate the water spray option, press "Automatic water spray" again.
- When the water spray is activated, the power-button light will flash blue, and remain
steady if the water spray is deactivated.
- If you set the window-cleaning robot to "Manual Displacement", the spraying process will
be the same.
- If you wish to spray manually, press "Manual water spray".
Manual mode operation
To manually steer the window-cleaning robot, hold down the arrow pointing the direction you
54
WINDROID 1290 DOUBLESPRAY CONNECTED
want the window-cleaning robot to take, either from the remote control or the app.
Automatic mode
You can choose from 3 route modes:
- N-mode: the window-cleaning robot will perform up-down and left-right movement.
- Z-mode: the window-cleaning robot will perform left-right and up-down movement.
- Z+N mode: the window-cleaning robot will first perform the Z cleaning mode followed by
the N mode.
At the end of the selected cleaning mode, the window-cleaning robot will return to the starting
point. While the robot returns to the starting point, spraying will be automatically deactivated.
NOTE:
Please note that the window-cleaning robot does not recognise the edge of the glass and may
therefore wet the window frame.
Cleaning instructions
Step 1. Dry cleaning
- It is recommended to use "Dry-cleaning mode" for first use. To do so, turn off the spray. If
the surface to be cleaned has too much sand, remove the sand previously.
- If you use the machine in sunny days or with low humidity, the dry mode will get better
results.
Step 2. Spray mode
- Select the desired cleaning mode on the remote control or app. The water spray is activated
by default.
- For best results, it is recommended that you first wet the mop with water or window-
cleaning products and make several passes over the glass or use the Z+N mode. Once the
mop has been dampened, clean the sensors, the drive wheels, and the air outlet with a
soft, dry cloth to ensure perfect operation of the window-cleaning robot.
- Please note that if the mop of your window-cleaning robot is too wet, the result will not be
as desired. It is recommended to moisten the mop slightly.
- If the surface to be cleaned has a lot of sand, it could form mud when spraying. Optimal
cleaning results would not be obtained–prior dry cleaning is therefore recommended.
NOTE:
Note that the geometry of the window borders may affect the final result.
ENGLISH
WINDROID 1290 DOUBLESPRAY CONNECTED
55