Idiomas disponibles
Idiomas disponibles
ENGLISH
Use the left and right direction buttons to set the minutes and hours. Use the upwards and
-
downwards arrow direction buttons to change the digits while they flash.
Finally, press the Start/Pause button or the clock setting button. The robot vacuum cleaner
-
will beep when the time settings have been confirmed.
Cleaning scheduling
For an easier cleaning, the robot includes a schedule function to set daily schedules
-
through the remote control. According to the setting, the robot will automatically start
cleaning in the selected days at the desired time.
The time options on the remote control are: 12:00 a. m.–11:59 p.m. and 12:00 p.m.–11:59 p.m.
-
Before setting the hour and the options on the robot vacuum cleaner, make sure it is on.
-
Press the schedule button on the remote control. The digits will start flashing. Fig. 28
-
Use the direction buttons upwards or downwards to select the day. Once selected, use the
-
right and left buttons to select the minutes and hours. To modify the minutes or hours, use
the left and right direction buttons to select the minutes and hours. Use the upwards and
downwards arrow direction buttons to change the digits while they flash. Press the Start/
Pause button again to save the settings. Follow the same steps to schedule the days. Fig.
29
Finally, press the schedule button to exit the scheduling mode. The robot will beep once
-
indicating the scheduled cleaning settings have been confirmed.
The user may schedule as many days a week as desired. The display screen will show
-
when the robot vacuum cleaner is programmed.
Cancelling the scheduled cleaning
Press the schedule button on the remote control, select the day you wish to delete and change
the set time to 00:00 am., this is the time you need to set to cancel the cleaning programme.
Warning
Make sure the remote control is close to the robot when setting the clock or scheduling
cleaning cycles.
5. CLEANING AND MAINTENANCE
High-efficiency filter
Fig. 30
The high-efficiency filter is designed with fibres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the filter, to avoid these particles from
building up in the filter, causing efficiency loss. It is convenient to carry out this maintenance
once a week.
It is recommended to replace the high-efficiency filter with a new one without exceeding 160
44
