cecotec CONGA QUICK&CLEAN TITANIUM Manual De Instrucciones página 43

Robot aspirador
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
every use.
It is recommended to be present when the robot is scrubbing.
-
When the robot vacuum cleaner returns to the charging base, you must remove the mop.
-
Do not leave the robot vacuum cleaner charging with the mop assembled.
Spiral mode. Fig. 22
The robot will carry out an intense cleaning of a specific area when this mode is activated.
-
It will start cleaning at a specific spot and will move outwards in a spiral motion (1 metre).
Then, it will return to the starting spot in an inwards spiral motion again.
Once it has finished and returns to the starting spot, the robot will start cleaning in Auto
-
mode until it runs out of battery.
Before using this mode, place it in the spot you wish to clean.
-
Press the Spiral cleaning button on the remote control to activate this mode.
-
Edge mode. Fig. 23
When this mode is selected, the robot will clean along walls and around furniture (e.g.
-
table or chair legs).
Press the edge cleaning button on the remote control.
-
Room mode. Fig. 24
The robot will carry out a 30-minute cleaning cycle when this mode is selected.
-
Press the Room mode button on the remote control.
-
To ensure an efficient cleaning of the room, make sure the robot stays in the room.
-
Back home mode
Press the Back home button on the robot or on the remote control (with a house icon) in order
to send the robot to the charging base. The robot vacuum cleaner will continue vacuuming until
it reaches the charging base.
Manual mode
Press the direction buttons on the remote control to use the robot vacuum cleaner manually.
Power level function
Press the suction power level button on the remote control in order to control the robot suction
power during the cleaning process. There are three suction power levels: Turbo, Normal and
Eco. Fig. 25
Setting the remote control time
Press the time setting button on the remote control. The digits will start flashing. Fig. 26
-
Select the day of the week using the upwards and downwards direction buttons. To save
-
the selected day, press the Start/Pause button. Fig. 27
ENGLISH
43
loading

Este manual también es adecuado para:

05792