Kenmore 437.85777 Guía De Uso Y Mantenimiento página 2

Purificador de aire tipo hepa limpiable
Idiomas disponibles

Idiomas disponibles

iMPORTANT
SAFETY
iNSTRUCTiONS
Please read all instructions before using this product. Save these instructions
for easy reference. When using electrical appliances basic precautions
should always be followed to reduce breakage, risk of fire, electric shock and
injury to persons including the following:
Read all instructions before operating the air cleaner.
Place the air cleaner where it is not easily knocked over by persons in the
household.
ALWAYS unplug air cleaner when not in use.
DO NOT use any product with a damaged cord or plug, or if product
malfunctions, is dropped or damaged in any manner.
Keep the power cord away from heated surfaces.
DO NOT use air cleaner outdoors.
NEVER use the air cleaner unless it is fully assembled.
DO NOT run power cord under carpets and DO NOT cover with throw rugs.
Arrange cord so it will not be tripped over.
DO NOT use air cleaner where combustible gases or vapors are present.
DO NOT expose the air cleaner to rain, or use near water, in a bathroom,
laundry area or other damp locations.
To disconnect air cleaner, first press Power Button to turn air cleaner OFF
and remove plug from outlet.
DO NOT allow foreign objects to enter ventilation or exhaust opening, as
this may cause electric shock or damage to the air cleaner.
Place air cleaner near a power outlet and avoid using an extension cord.
DO NOT block air outlets or intakes.
To reduce the risk of electrical shock, this equipment has a grounding type
plug that has a third (grounding) pin. This plug will only fit into a grounding
type power outlet. If the plug does not fit into the outlet, contact qualified
personnel to install the proper outlet. Do not alter the plug in any way.
The air cleaner has a 3-prong (grounded) plug for safe operation. The
3-prong plug should be plugged directly into a properly grounded 3-prong
electrical outlet. DO NOT, FOR ANY REASON WHATSOEVER,
CUT OR
REMOVE THE GROUNDING PRONG FROM THE PLUG. Removing the
grounding plug may result in electrical shock or create unsafe condition.
Contact a qualified electrician to be sure the outlet is properly grounded.
=A loose fit between the plug and the AC outlet (receptacle) may cause
overheating and distortion of the plug. Contact a qualified electrician to
replace loose or worn receptacles.
= DO NOT sit, stand on, or place heavy objects on the air cleaner.
=ALWAYS disconnect power supply before servicing.
WARNING! To reduce the risk of fire or electric shock,
DO NOT use this product with any solid-state speed
control device.
2
loading