Idiomas disponibles
Idiomas disponibles
to the appliance.
GB
• WARNING! DO NOT USE THIS APPLIANCE ON ANY METALIC
SURFACE.
• WARNING! Before obtaining access to terminals, all supply
circuits must be disconnected.
• ATTENTION! The power supply lines should be connected by
authorized technician.
Intended use
• This appliance is intended to be used for commercial applica-
tions, for example in kitchens of restaurants, canteens, hos-
pital and in commercial enterprises such as bakeries, butch-
eries, etc., but not for continuous mass production of food..
• The appliance is designed for cooking a variety of food via
heating the suitable cookware. Any other use may lead to
damage of the appliance or personal injury.
• Operating the appliance for any other purpose shall be
deemed a misuse of the device. The user shall be solely liable
for improper use of the device.
Grounding installation
This appliance is classified as protection class I and must be
connected to a protective ground. Grounding reduces the risk
of electric shock by providing an escape wire for the electric
current.
This appliance is fitted with a power cord with grounding plug
or electrical connections with grounding wire. The connections
must be properly installed and grounded.
Control panel
(Fig.1 on page 3)
1. On / Standby button
2. Increase setting: Time / temperature / power
3. Digital display
4. Timer button with light indicator
5. Decrease setting: Time / temperature / power
6. Power / Temperature selection button with light indicator
for Power and temperature respectively. Press same button
alternately for selection.
6a. Power light indicator
6b. Temperature light indicator
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
8
Suitable cooking equipment
Suitable
Bottom of
Flat bottom
cookware
(Fig.2 on page 3)
Material
Cookware with iron,
cast iron, magnetic
stainless steel or
enamelled iron
bottom.
Diameter of
Between 14 cm and
the bottom
28 cm.
Type of
Cookware with a
cookware
bottom thickness over
1.5 mm.
Note: Using a pan or pot that's not suitable for induction cook-
ing may damage the appliance.
Power supply line connection
(Fig.4 on page 4)
A. Black
B. Brown
C. Grey
D. Blue
E. Green and yellow
ATTENTION: The power supply lines should be connected by
authorized technician.
Operating instructions
• Place a suitable cookware at the centre of the heating surface
of the appliance. (See --> Suitable cooking equipment).
Note: Do not place empty cookware as this may damage the
cookware.
• Connect the internal wires of the power cord to a suitable elec-
trical supply outlet. (See --> power supply line connection)
• Switch on the electrical supply system and On / Standby indi-
cator will light up. The appliance now in Standby mode.
• Then, switch On the appliance by pressing On / Standby but-
ton and " - - - -" will flash on the display.
• Next, press increase setting once. "3000" will be displayed
and this is the default power.
• Now, the appliance starts operating and you can program in
either power or temperature mode.
Setting Power level
• During operation, press the power / temperature button to
activate. The indicator light of the power will light up.
• Press the increase setting or decrease setting button to in-
crease or decrease the power level (Range: 100W ~ 5,000W).
Default power is 3,000W. Higher power level is suitable for
steaming.
Setting Temperature level
• During operation, press the power / temperature button to
activate. The indicator light of the temperature will light up.
• Press the increase setting or decrease setting button to in-
crease or decrease the temperature level (Range: 35°C ~
240°C). Default temperature is 100°C. Higher temperature
level is suitable for roasting, grilling or frying.
Not suitable
Curved, uneven,
rounded bottom
(Fig.3 on page 3)
Cookware with
ceramic, glass, copper,
bronze, or aluminium
bottom.
Less than 14 cm or
more than 28 cm.
Completely closed
containers or cans.
