Clearing All Measurement Values Saved; Lcd Backlight - Amprobe ISO-PRO TELARIS Serie Manual De Uso

Clearing all Measurement Values Saved:

1) Set measurement function selection dial (19) to one of the 7 measurement functions.
2) Press the "Clear" key (25) for approx. 5 seconds
3) An acoustic signal is audible. The number of all measurement data saved is displayed.
The number of the measurement values is reduced by 1.
4) After approx. 2 s the last measurement value saved is deleted and an acoustic signal
is audible.
5) After further 2 seconds another acoustic signal is audible and all data is cleared. "0"
is briefly displayed in the small result window. The memory is now completely cleared.
The symbol "M" disappears from the display.

LCD Backlight

The key (27) is used to switch the backlight on or off. After approx. 20s following the last
key pressing or the last measurement function selection dial operation, the backlight is
automatically switched off to reduce battery consumption.
21