Required Dimensions For Installation; Important Note To Installer; Installation Flow Chart - Samsung WA50F9A7D Serie Manual Del Usuario

installing your washer

Required dimensions for Installation

iMPoRTAnT noTE To inSTALLER

Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.

Installation Flow chart

Removing the
Selecting
shipping bolts
a location
(*Drum only)
[Running a test cycle]
Run a test cycle(Rinse+Spin)
with small amount of laundary
Please check again before steps.
STEP 1 Selecting a Location
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer doesn't rest on its power cord.
14_ installing your washer
F900A WASH_WA50F_USER MANUAL_DC68-03133H-03_EN.indd 14
44.7 in.
(113.5 cm)
39.3 in.
(99.8 cm)
27.0 in.
(68.6 cm)
58.1 in.
(147.6 cm)
*Required spacing
Connecting the water
and the drain
(about 4~5 Towels)
29.3 in.
(74.4 cm)
29.3 in.
(74.4 cm)
48 in.² *
(310 cm²)
24 in.² *
(155 cm²)
Closet or Door
Adjusting the
levelling feet
Does a
a Calibration
Laundary machine
No
Vibrate?
Yes
44.7 in.
(113.5 cm)
3 in.
(7.6 cm)
3 in.
(7.6 cm)
Powering your
washing machine
Running
Finish the
installation
mode
2013-12-23 19:16:54