Required Dimensions For Installation; Important Note To Installer - Samsung WA48H7400A Serie Manual De Usuario

Required dimensions for Installation

importAnt note to instAller

Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.
Installation Flow chart
Selecting
a location
Run a test cycle(Rinse+Spin)
with small amount of laundary
Please check again before steps.
sTep 1 Selecting a Location
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer doesn't rest on its power cord.
WA7000HA WASH_WA48H_USER MANUAL_DC68-03133P-05_EN.indd 13
43.9 in.
(111.5 cm)
39.3 in.
(99.8 cm)
27.0 in.
(68.6 cm)
58.1 in.
(147.6 cm)
*required spacing
Removing the
Connecting the water
shipping bolts
and the drain
(*Drum only)
[Running a test cycle]
(about 4~5 Towels)
29.3 in.
(74.4 cm)
29.3 in.
(74.4 cm)
48 in.² *
(310 cm²)
24 in.² *
(155 cm²)
Closet or Door
Adjusting the
levelling feet
Does a
Laundary machine
No
Vibrate?
Yes
English - 13
43.9 in.
(111.5 cm)
3 in.
(7.6 cm)
3 in.
(7.6 cm)
Powering your
washing machine
Running
Finish the
a Calibration
installation
mode
2015/4/15 16:35:32