Required Dimensions For Installation; Important Note To Installer; Installation Flow Chart - Samsung WA50F9A6D Serie Manual Del Usuario

installing your washer

Required dimensions for Installation

*Required spacing

iMPoRTAnT noTE To inSTALLER

Please read the following instructions carefully before installing your washer.
These instructions should be retained for future reference.
We recommend you hire a professional to install this washer.

Installation Flow chart

Removing the
Selecting
shipping bolts
a location
(*Drum only)
[Running a test cycle]
Run a test cycle(Rinse+Spin)
with small amount of laundary
(about 4~5 Towels)
Please check again before steps.
STEP 1 Selecting a Location
Before you install the washer, make sure the location:
• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
• Is away from direct sunlight.
• Has adequate ventilation.
• Is not exposed to freezing temperatures (temperatures under 32 °F or 0 °C).
• Is away from heat sources such as oil or gas.
• Has enough space so that the washer doesn't rest on its power cord.
14_ installing your washer
F900A WASH_WA50F_USER MANUAL_DC68-03133H-07_EN.indd 14
44.7 in.
(113.5 cm)
39.3 in.
(99.8 cm)
27.0 in.
(68.6 cm)
48 in.² *
(310 cm²)
58.1 in.
(147.6 cm)
24 in.² *
(155 cm²)
Connecting the water
and the drain
Laundary machine
Yes
29.3 in.
(74.4 cm)
44.7 in.
(113.5 cm)
29.3 in.
(74.4 cm)
3 in.
(7.6 cm)
3 in.
(7.6 cm)
Closet or Door
Adjusting the
levelling feet washing machine
Running
Does a
a Calibration
No
Vibrate? mode
Powering your
Finish the
installation
2015/4/17 15:16:39