Idiomas disponibles
Idiomas disponibles
EP-44SIP(H) WEBSERVER
3.2. Network Connections
3.2.1. Network Settings
Allows a more extended setting of network parameters than "Quick Setup".
The network settings can be configured as described below.
IP Type: Defines the IP addressing method: Static IP or Automatic IP (DHCP)
Domain Name*: Defines the Domain Name to identify services provided through the Internet.
IP Address*: Set the LAN IP address and it should be unique on the network.
Subnet Mask*: Set the range of IP address reachable from the device.
Default Gateway Address*: The IP address of the default gateway.
Primary DNS*: Set the primary DNS server address.
Secondary DNS*: The secondary DNS server address. The device connects to this DNS server if the
primary DNS server is unavailable.
MAC Address: Device's physical address used to identify device in the network.
LAN Port Mode: Sets the LAN port operation mode. Full / half duplex – 10/100 Mbps or automatic.
PC Port Mode: Sets the PC port operation mode. Full / half duplex – 10/100 Mbps or automatic.
When parameters are set then click Submit to apply.
*Settings available in Static IP mode.
EP-44SIPx_Webserver_Manual_ENG_v2.0
Page 8 of 47
