Idiomas disponibles
Idiomas disponibles
REF. 60020
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This tool is designed to perform woodworking tasks. It
can be used to achieve a smooth finish in wood surfa-
ces and carry out tapering tasks. It will perfectly work
for rabbeting purposes too, where a groove cut into the
edge of the material or workpiece is required, such as
trimming over the sides of doors which are too wide or
cut window jambs.
It is equipped with a parallel guide to guarantee a pro-
per planning onto the workpiece, together with three
locking knobs and a wrench. It features a cutting width
of 82mm, a cutting depth that can be adjusted up to
2mm by means of its adjusting knob, and a rabbeting
depth which can also be adjusted up to 10.50mm by
using the adjusting knob supplied.
This tool has an aluminum alloy base to provide accu-
racy while planning, a dust collection system to capture
the woodworking dust, and a trigger switch lock-off but-
ton to prevent an accidental starting of the tool.
SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions
listed below may result in electric shock, fire and/or
serious injury, or void the warranty.
• Check for breakage of parts, damage to switches
and any other conditions that may affect its ope-
ration.
• Do not operate the tool in the presence of flam-
mable liquids, gases or dust.
• Dress properly. Do not wear loose clothing or
jewelry and tighten long hair.
• Avoid an accidental starting. Disconnect the bat-
tery from the tool and place the switch in the loc-
ked or off position before making any adjustments,
changing accessories, or storing the tool.
• Keep the tool and its handle dry, clean and free
from oil and grease.
• Always wear eye and respiratory protection.
• Hold the tool by the insulated grip surface when
performing an operation where the tool may come
in contact with the hidden wiring. Contact with a
"live" wire will make exposed metal parts of the
tool "live" and shock the operator.
• Make sure all keys and adjusting wrenches are re-
moved from the tool before switching it on to avoid
them to fly away at high velocity.
• Always use both hands on the tool for any opera-
tion to maintain a good control of the planer.
• Always, use clamps or any other element to su-
pport the workpiece to a stable platform.
• The use of this tool can generate and disburse
dust or other airborne particles. You must direct
particles away from your face and body.
• Always operate the tool in a well-ventilated area
and provide for proper dust removal, using the
dust collection system wherever possible.
• Do not touch the workpiece immediately after ope-
ration; they may be extremely hot and could burn
your skin.
ASSEMBLY
Installing the parallel guide
1. Insert the screw through the slot of the support
and parallel guide.
2. Fit the adjustment knob onto the screw to fix the
assembly.
3. Insert the other locking knob through the hole on
the support and into the nut on the housing. Then,
tighten it turning clockwise to fix the assembly in
place.
4. Loosen the adjustment knob by turning it anticloc-
kwise and slide the parallel guide in or out to the
desired position.
5. Tighten the locking knob to set the guide into the
desired position.
OPERATION
Switching On/Off
To turn it on, press the lock-off button, simultaneously
depress the trigger switch at the same time, and then
release the lock-off button.
· 7 ·
