Weller Laser Line LL150 Traducción Del Manual Original página 20

página de 152

/ 152

Idiomas disponibles

Technical Data

Extraction unit

Dimensions L x W x H

Weight

Maximum quantity supplied

Maximum vacuum

Power consumption

Mains supply voltage

Glass tube fuse (5 x 20)

Operating sound level from 1 m distance

Combined filter

Interface

Operation

Notice

The unit may emit dust from

the main filter after transpor-

tation. Make sure that the

unit is put into service in a

suitable room.

Caution!

A high noxious gas concent-

ration will cause the activated

charcoal to heat up. To avoid

overheating, the unit should

be run without noxious gases

for several minutes before

switching off.

Laser Line LL150

340 x 340 x 680 mm

13.4 x 13.4 x 26.8 inch

18 kg

140 m3/ h (82,3 CFM)

2.300 Pa

100 W

110-240 V 50/60 Hz

2 x 6,3 AT, 250 V

< 50 dB(A)

Combined H13 high

efficiency submicron filter

(99.95 % particle separati-

on upto 0.12 μm) and wide

band gas filter

(100 % AKF, 50 % Potassi-

um Permanganate)

The full range of system

functions can be operated

and remotely monitored

via the interface using an

optional interface adaptor.

Put the tool into operation as described in the chapter „Placing into

operation".

Please adhere to the operating instructions of the connected devices.

Check to see if the mains voltage matches the ratings on the name-

plate.

Make sure the machine is switched off before plugging in.

Optimal gas filtration is achieved as follows:

• Temperature of process air in gas filter < 38 °C

• Relative humidity < 60 %

• Gas molecules > 30 g/mol (better filtration results are achieved

with larger molecules)

• Boiling point of the gas molecules > 0 °C

MG140