637Wa Mission Hutch — Parts List(cont)
BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below.
K — Cam Connector — Qty. 4
N — #6x5/8" Philtruss
Screw — Qty. 16
R — Shelf Bracket
ASSEMBLY INSTRUCTIONS
Phillips Screwdriver, Padded Hammer or Rubber Mallet, Wood Glue, Tape Measure.
WE RECOMMEND FINISHING THE UNIT BEFORE ASSEMBLY.
J
Ea
A
Fa
FIG. 1
1) Lay out the wood parts in their approximate positions to become familiar with their attachments
points. See FIGURE 1.
L — Cam Housing — Qty. 4
O — Mending Plate — Qty. 2
— Qty. 4
637Wa Mission Hutch
TOOLS REQUIRED:
IMPORTANT:
Before finishing, read enclosed finishing hints.
H
Ea
Ba
Ga
Ga
Sa — #6 x 1/2" Undercut
Screw — Qty. 4
Ea
I
Ca
T
M — #8x1⅝" Black
Screw — Qty. 2
P — Pad — Qty. 8
J
Ea
D
Fa
637Wa (Rev. 8/07) – PAGE 3
