Tools Required: Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue
Fig. 1
Spread a thin layer of glue in the dowel holes in the Left Side Assembly (Rb). Making sure the
1.
curved edge of the front stretcher faces the front of the unit and all pocket drilled holes
face down, insert the Front Stretcher (J), Back Stretcher (K), and Shelf (L) into the Left Side
Assembly (Rb). Quickly wipe away any excess glue. Using the pocket drilled holes as guides,
fasten in place with
Fig. 2
Spread a thin layer of glue in the dowel holes in the Right Side Assembly (Qb). Insert the left side
2.
assembly and quickly wipe away any excess glue. Using the pocket drilled holes as guides,
fasten in place with
900Wc Seneca Side Table
Assembly Instructions
L
S
#8x1-3/16" Pan Head Screws
Qb
#8x1-3/16" Pan Head Screws
J
K
Rb
(S). See Figure 1.
S
(S). See Figure 2.
S
x 4
The backs
of the Left and
Right Side
Assemblies
are grooved.
S
x 4
Page 3 — 900Wc — 12/13
