Idiomas disponibles
Idiomas disponibles
The instrument can be designed and accompanied by specific documentation for use
in an ATEX classified environment.
The environment where the instrument is used must not be exposed to:
Corrosive fumes.
•
Humidity above 90% and relative humidity changes above 0.005 p.u./h.
•
Excessive and/or abrasive dust.
•
Oily vapours.
•
Dust or gas mixtures.
•
Salty air.
•
Abnormal vibrations, impacts or shocks.
•
Weathering or dripping.
•
Thermal variations greater than 5 K/h.
•
Nuclear radiation.
•
The machine is designed and built to operate safely in the following environmental conditions:
Room temperature
Maximum relative humidity
Place of use
Ambient lighting
Standing surface
Ensure that the surface that the instrument is installed on is flat, solid and able to
withstand the expected loads.
5.3.3 INSTALLATION PLACE
For installation, an area suitable for the size of the machine and the lifting equipment used must be
provided, paying attention to any obstacles (other machines, walls or the like) along the route to be
covered by the handling equipment.
The instrument must be installed according to the layout agreed with the Manufacturer.
Maintain a minimum distance from walls of at least 1.5 metres in order to be able to work around the
perimeter of the guards in an ergonomically favourable position.
Danger of damage.
Install the instrument at a distance from the transit areas of forklifts or lorries.
WARNING
CAUTION
Between -10 °C and +40 °C
85 % non-condensed
Industry (indoors)
> 350 lux
Concrete industrial floor
