Adjusting Interpupillary Distance; Use Of Eyeshields; Selecting The Light Path - Optika Italy IM Serie Manual De Instrucciones

10.5 Adjusting interpupillary distance

Observing with both eyes, hold the two eyepiece prism assem-
blies. Rotate them around their common axis until the fields of
view match.
• The graduation on the interpupillary distance indicator
①, pointed by the spot "." on the eyepiece holder, shows
the distance between the operator's eyes. (Fig. 14)
The range of the interpupillary distance is 48-75mm.

10.6 Use of eyeshields

• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded eyeshields avoid
scratching the lenses of eyeglasses. (Fig. 15)
• Use without eyeglasses
Raise eye shields and observe at the microscope placing eyes
to the shields, avoiding external light to disturb the observation.
(Fig. 16)

10.7 Selecting the light path

• The observation head is equipped with an optical path
selector that allows the light to be distributed to the eyepieces
and to the photo / TV port.
1. Move the selector ① to the left (In) or to the right (Out) to
distribute the light. (Fig. 17)
POSITION
Out
In
LIGHT
100% EYEPIECES
50% EYEPIECES - 50% TV
①
①
Page 13
F ig. 14 F ig. 14
F ig. 15 F ig. 15
F ig. 16 F ig. 16
F ig. 17 F ig. 17