Scheppach DP18VARIO Traduccion Del Manual De Instrucciones Originale página 28

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling
• Failure to comply with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts,
• Improper use
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
28 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description
1. Machine foot
2. Column
3. Clamping handle
4. Drilling table
5. Engine
6. Speed adjustment lever
7. V-belt cover
8. Emergency stop switch
9. On and off switch
10. Handle
11. Folding swarf protector
12. Drill chuck (illustration may differ)
13. Roller support
14. Wing screws
15. Digital display
16. Laser ON/OFF switch
17. Machine head
18. Work lamp on/off switch
19. Rotatable scale ring
20. Crank handle
21. Tapered mandrel
22. Drilling table holder
23. Hexagonal bolts
24. Work lamp
25. Drilling table holder hexagonal bolt
26. Mounting holes
A. Hexagon spanner
B. Taper key
C. 4 mm Allen key
D. 3 mm Allen key
3. Scope of delivery
• 1 Drilling machine
• 1 Drilling table
• 4 Handles
• 1 Folding swarf protector
• 2 Wing screws
• 4 hexagonal bolts
• 1 Clamping handle
www.scheppach.com