Idiomas disponibles
Idiomas disponibles
1.3 - STORAGE
planks or a pallet.
TO NOT TURN THE CARTON UPSIDE DOWN.
1.4 - RECEIPT AND UNPACKING
The packaging is made up from suitable material and performed by expert personnel.
The units are delivered complete and in perfect condition. However, for he quality control of the transport
services, follow the warnings below:
a. On receipt of the packages, check whether the packaging is damaged. If this is the case, withdraw the
goods with reserve, producing photographic proof and any apparent damage.
b. Unpack, checking the presence of the individual components with the packing lists.
c. Control that all components have not undergone damage during transport. If this is the case, inform the
carrier by registered letter with acknowledgement of receipt within 3 days of receiving the goods, presenting
photographic documentation.
d. Pay attention when unpacking and installing the equipment.
the condenser and evaporator.
e. Send the same information by fax also to OLIMPIA SPLENDID.
No information concerning damage undergone can be taken into consider-
ation after 3 days from delivery.
For any controversy the court of jurisdiction will be BRESCIA.
Keep the packaging for at least the duration of the warranty period, for any shipments to the after-sales
centre for repairs. Dispose of packaging in compliance with the regulations in force regarding waste dis-
posal.
2 - INSTALLATION
2.1 - INSTRUCTIONS FOR INSTALLATION
To obtain the best results and optimum performance, follow the instructions for correct installation provided
in this manual.
The appliance must be installed, activated and kept in an environment
with area exceeding X m
The appliance must not be installed in a non-ventilated area, whenever
the surface is less than X m
Failure to apply the regulations indicated, which can cause unit malfunction-
ing, relieve OLIMPIA SPLENDID from any form of warranty and any damage/
injury caused to persons, animals or objects.
The electrical system must comply with the regulations and rating data in the
technical sheet, with good grounding.
EN - 10
(see table at the side).
2
(see table at the side).
2
