Idiomas disponibles
Idiomas disponibles
Registration on akonet.cloud (only AKO-16525AN)
In order for the controller to be able to send operation data to akonet.cloud, it must be registered.
To do this, go to
https://akonet.cloud
one of these two methods:
• Enter the serial number (S/N) and validation code / IMEI that appear on the tag and press "Search".
• Capture the QR code that appears on the tag using the
tablet or mobile phone).
These data are found on the tag on the right hand side of the controller. More information can be found in the
akonet.cloud user guide at:
To access akonet.cloud, enter this address in your browser (the use of Google Chrome is recommended):
akonet.cloud.
Before activating the device, make sure that there is enough reception at the installation location. Acti-
vated devices may not be returned.
Forcing transmission
When the steps of the configuration wizard and the registration process are completed in akonet.cloud, you must
force a first transmission to verify the level of reception:
Press and hold the ESC and SET keys for 3 seconds.
After a moment, the display shows the quality of the NBIoT signal received:
Low quality
The controller does not start transmitting data to akonet.cloud until the first transmission
is forced.
(requires registration), click on "Add new device"
"https://enhelpakonet.ako.com/"
Medium quality
option (requires having a camera on your PC,
High quality
24
1652H4A11 Ed. 10
and continue with
https://
Communication
error
