Idiomas disponibles
Idiomas disponibles
EN
22
(2) Set weekly timer
To start the weekly timer mode, press the on/off button. When the power symbol
disappears from the display, press the timer button
symbols flash.
To program the weekly timer:
1.
Press the arrow buttons
gear button
to confirm.
2.
[P1] flashes in the display. Press the gear button
3.
Set the switch-on time. The hour flashes in the display. Press the arrow
buttons
or
to set the hour. Then press the gear button
The minutes flash on the display. Press the arrow buttons
minutes. Then press the gear button
4.
Set the switch-off time in the same way as the switch-on time.
5.
Set the daily on and off time for P2, P3 and P4 using the same method as for
P1.
Note: The heating periods P1, P2, P3 and P4 can be set to turn the heating on or
off at different times each day.
6.
After setting the weekly timer, wait for the display to return to standby mode
after about 10 seconds. Press the gear button
power button
. Make sure that the two symbols on the display light up at
the same time, then the device will work in weekly timer mode. If you want to
switch back to normal mode, directly press the power button
device then switches to standby mode and you can operate it manually again.
or
to set the day of the week. Then press the
to confirm.
once and then press the
. The timer and calendar
again to confirm.
to confirm.
or
to set the
again. The
