Idiomas disponibles
Idiomas disponibles
6.0 INSTALLATION
6.1 POSITION OF THE APPLIANCE
• Note: The dishwasher is fitted with a water inlet and outlet hose, which can be positioned on
the right or left.
• Keep the appliance at least 30 cm away from cookers and other heat sources.
• Place the appliance on a cabinet or table to facilitate the inflow and outflow.
• Place the appliance in a flat and stable location that is not exposed to direct sunlight or extreme
cold.
6.2 WATER CONNECTION AND WATER OUTLET
1.
Connect the water outlet hose to the outlet.
Caution! Do not immerse the end in water, a free outflow must be ensured.
2.
Secure the water outlet hose with the suction cup to the sink.
3.
Connect the water inlet hose, connect it to the G3/4" threaded connection of the tap and
ensure that it is seated firmly. If the pipe is new or has not been used for a long time, let the
water flow until it is clean and clear. If these precautions are not taken, there is a risk of the
water inlet becoming clogged and the appliance being damaged.
4.
The required water pressure is 0.3 bar ~ 10 bar. If the water pressure is higher, a pressure
reducing valve must be connected upstream.
6.3 FILLING WITH WATER MANUALLY
Adding water manually if there is no water supply pipe:
Open the water tank cover and pour in 4.5 litres of water before starting the appliance. The
appliance emits 5 acoustic signals.
If there is not enough water in the water tank, the tap symbol (g) lights up. When there is
enough water in the water tank, the appliance emits 5 acoustic signals and the tap symbol (g)
goes off.
Ensure that the water tank is full and the tap symbol (g) is off, then run the program, otherwise
the error E1 appears.
23
www.DEUBAXXL.de
