Idiomas disponibles
Idiomas disponibles
8.
Remove
belt from trimmer
head pulley.
9.
Note the position
of the control
cable
and idler
return
spring,
then
remove
idler assembly
from chassis
and
remove
belt and idler from trimmer.
10. Remove
belt from idler assembly
by
removing
bottom
belt keeper
and idler
pulleys.
11.Assemble
new
belt, idler
pulleys
and
bottom
belt keeper
to idler bracket.
Tighten
pulley
bolts
securely.
NOTE:
Be sure belt is inside
top belt
keeper
on idler assembly.
12. Position belt and idler assembly
in
trimmer, reconnect
idler spring and
assemble
idler to chassis.
13. Install belt around trimmer head pulley
and engine pulley.
14. Replace debris shield and tighten the
four (4) screws securely.
15. Replace chassis cover and tighten
screw securely.
Always use Craftsman
replacement
parts
to assure proper fit and long life.
Engine pulley
Idler bracket
Flatidler
Belt
Nut
Spacer\
V-idler_
Idler
spring
Bottom
belt
keeper
Flatidler
Idler assembl'
" -.
Top belt keeper
.
Bolt
Trimmer head pulley
ENGINE
ENGINE
SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal
injury. If you
believe that the engine is running too fast
or toe slow, take your unit to a Sears or
other qualified
service center for repair
and/or adjustment.
CARBURETOR
Your carburetor
has a nonadjustable
fixed
main jet for mixture
control.
If your engine
does
not operate
properly
due to sus-
pected carburetor
problems,
take your
unit to a Sears or other qualified service
center for repair and/or adjustment.
IMPORTANT:
Never tamper with the
engine governor, which is factory set for
proper engine speed.
Overspeeding
the
engine above the factory high speed
setting can be dangerous.
If you think the
engine-governed
high speed needs
adjusting, take your unit to a Sears or
other qualified
service center, which has
proper equipment
and experience
to
make any necessary
adjustments.
14
