FITFIU FITNESS HSM-MT14 Manual Usuario página 47

ASSEMBLY
STEP 1.
Take all parts out of the carton and place them on a firm, flat surface. Remove all packing materials.
STEP 2.
Position the equipment on its right side, then insert a stabiliser foot (1) into the frame (A). Secure the side parts together using
2 M6x10 screws (2) and 1 M8x20 screw (3). Firmly tighten (rotate right) all fasteners using the Allen keys. Repeat this process
for the left-hand side.
STEP 3.
Position the equipment so it is standing on the frame and stabiliser feet – this is the folded position. Hold the belt platform (C)
firmly so that it cannot fall, then remove (rotate left) the locking bolt (B) – this allows the belt platform to be lowered. Gently
lower the belt platform so the equipment is unfolded, then secure the belt platform to the handlebar frame (D) using the locking
bolt (B) and tighten (rotate right) it firmly by hand.
STEP 4.
Rotate the handlebar / console (E) forward so the handlebars are horizontal. On the underside of the console, secure it
to the frame using 2 M8x20 screws (3). Firmly tighten (rotate right) the fasteners using the Allen key.
The machine should resemble the image below and is ready for use.
A
1
C
B
E
47
ELECTRIC TREADMILL HSM-MT14
D
2
3
B
3
EN