Idiomas disponibles
Idiomas disponibles
• Fit the cover (C) on the appliance in order to have the pulp evacuation
exit to the rear (see
• Lock the two handles (H) on the cover (C). You will hear an audible "click"
(see
Fig.
5).
• Slide the pusher (A) into the feeding tube (B) aligning the groove on the
pusher with the small ridge in the feeding tube.
• Place a glass under the pouring spout (F) in front of the appliance (see
Fig.
6).
• Plug in the appliance.
• To start the appliance, use the control button (I).
• Cut the fruits or vegetables into pieces if necessary after removing the
stones.
• Insert the fruits or vegetables through the feeding tube (B).
• The fruits and vegetables must be inserted only while the motor is
running.
• Do not press too hard on the pusher (A). Do not use any other utensil.
NEVER push food with your fingers.
• When you have finished, stop the appliance by turning the control
button (I) to 0 and wait until the sieve (D) stops completely.
• When the pulp container (G) is full, or the juice flow slows down, empty
the pulp container (G) and clean the sieve (D) and the cover (C).
Ingredients
Apples
Pears
Carrots
Cucumbers
Pineapple
Tomatoes
Celery
Do not use the appliance for more than 1 minute continuously.
(*) The quality and quantity of juice varies widely depending on the
freshness of the fruit or vegetables and variety of each vegetable or
fruit. The quantities of juice indicated above are therefore approximate.
8
Fig.
4).
Approximate weight (kg)
1
1
1
1(about 2 cucumber)
1
1
1
Quantity of juice
(ml)
650
650
550
600
500
600
700
