very minor. The following table contains various tips:
Description
• Ensure the mains cable is connected securely at both ends.
• Use the remote control near the unit.
• Point the remote control at the remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• Remove any obstacles between the remote control and the unit.
• The unit may freeze up during use. Switch the unit off and then on again at the mains socket
to reset the unit.
• There is no disc inside the unit ("NO DISC" appears on the display).
• Insert the disc correctly with the label side facing up.
• Clean the disc.
• PAUSE mode may be activated, deactivate it.
• A non-valid disc has been inserted.
• Condensation may have formed inside the unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
• Make sure the unit is on a secure spot. Vibrations or jarring can cause the disc to skip.
• Check the file format.
• This product only supports MP3/WMA File formats.
• Weak signal. Use the Manual Tune function.
• iPod/iPhone/iPad may not be docked properly or installed properly.
Remove your iPhone/iPod from the dock and check for obstructions on the connectors in the
dock and on your iPod/iPhone/iPad.
• Make sure that your iPod/iPhone/iPad is working properly before docking. Please refer to your
iPod/iPhone/iPad manual for details.
• Make sure the iPod/iPhone/iPad is connected properly.
• Standby mode may be activated; press the button again.
• Make sure the iPod/iPhone/iPad is switched on.
• Vibrations may have caused the iPod/iPhone/iPad to come loose from the docking station.
• Check the corresponding iPod mode is selected.
• Reinsert iPhone/iPad.
• Insert the USB device the other way round.
• Some USB devices may not be compatible with the unit.
• Only MP3/WMA fie formats are supported.
the unit from the mains socket and reconnect it again.
45