Idiomas disponibles
Idiomas disponibles
3. Press the
,
buttons to select an option and then
press the 1 button.
4. Press the
,
buttons to select a setting and then
press the ENTER button .
- To return to the previous menu, press the
- To exit the menu, press the SETUP button.
Language Settings
You can select a preferred language for audio, subtitle
and disc menu.
• Language
Select the desired language for on screen menus of the
unit.
• Subtitle
You can override the Subtitle setting in the Setup menu
by pressing the SUBTITLE button on the remote control
while a DVD disc is playing.
• DivX Subtile
• Audio
• DVD menu
Video Settings
• View mode
The shape of the television or monitor may not match
the shape of the movie frame. To avoid distortion on
older televisions, you may need to change the way in
which the image is displayed. Televisions use a 4:3
aspect ratio; high-definition televisions use 16:9 aspect
ratio (as do movies).
• You may need to read your television's manual
in conjunction with this section in order to
achieve the best results. Some discs do not
allow the aspect ratio to be changed and you
will therefore have to change the aspect ratio on
the TV.
• Make this setting while playback is stopped;
you cannot do this while playing back a disc.
4:3 Pan Scan
This mode is used with 4:3 televisions. 4:3 images are
displayed normally. When showing 16:9 programmes,the
full height of the screen is displayed, and the left and
right part of the image are cut off.
4:3 Letter Box
This mode is used with 4:3 televisions. 4:3 images are
displayed normally. 16:9 images are visible at their full
width, but there are blank area at the top and bottom of
the screen.
16:9
Use with a 16:9 wide television.
button.
- Some wide-screen discs that do not permit the Pan
Scan mode playback are automatically played in Letter
Box mode.
- Depending on the DVD, 4:3 Letter Box may be
selected automatically instead of 4:3 Pan Scan and vice
versa.
- If 16:9 (Wide) is selected and a normal TV is
connected, 16:9 content will appear distorted during
playback (objects look thin).
• Tv system
PAL
Select this when the unit is connected to a PAL TV.
Auto
Select this when the unit is connected to a Multi TV.
Ntsc
Select this when the unit is connected to an NTSC TV.
• Video out
S-VIDEO
You can adjust some parameters of video picture.
Component
Set the video output according to the video connection.
RGB
If the composite connection is used, select this option.
HD
Select this to have the signal output when your TV or
monitor is connected to the HDMI out terminal.
• HD Resolution
Auto
480p/576p
720p
1080i
1080p(50Hz)
• HD Jpeg mode
On
Off
41
