Idiomas disponibles
Idiomas disponibles
4. The hour digits will flash on the display. Press the
/
buttons on the remote control to adjust the hour
digits, and then press the ENTER or TIMER buttons on
the remote control to confirm.
5. The minute digits will flash on the display.
Press the
/
buttons on the remote control to adjust
the minute digits, and then press the ENTER or TIMER
buttons on the remote control to confirm.
6. The display will show the selected timer and "ON"
will flash on the display. Press the
the remote control to select "ON" to enable the timer,
otherwise select "OFF" to disable the timer. Press the
ENTER or TIMER buttons on the remote control to
confirm.
• Each enabled state will be cleared if a button is
not pressed within 15 seconds.
• To check the timer setting, press the TIMER
button on the remote control, the display will
show "TIMER ON" and "TIMER OFF" settings.
• The FM tuner timer will go to the last station
you tuned into.
Setting the Sleep Timer
Use the sleep timer to turn the system off after a certain
number of minutes in play mode. By setting the sleep
timer, you can fall asleep to music and know that your
system will turn off by itself rather than play all night.
1. To set the sleep timer press the SLEEP button on
the remote control repeatedly to view the different timer
settings. The number of minutes shown will display in
this sequence:
2. The system is now set to turn off after the number of
minutes you have set. The display will show "SLEEP #",
e.g. "SLEEP 10" means the unit will switch itself off after
10 minutes, and so on.
3. Press the SLEEP button to show the reminding time
till the unit switches off minutes and return back to
previous screen.
4. To cancel the sleep timer press the SLEEP button
repeatedly until "SLEEP 00" shows on the display.
36
/
buttons on
USB/SD Card Operation
1. While in the ON mode, tap the FUNCTION Button
repeatedly on the unit or press the USB/SD button on
the remote control to select USB/SD mode.
2. Press down on the PUSH logo on the docking cover
of the unit to flip up the docking cover.
3. Insert the USB/SD card device.
4. The unit will automatically starts playback.
5. Press the 12 Button on the unit or press the 12
button on the remote control to start / pause / resume
playback.
6. Press the 7/8 buttons on the remote control to skip
to previous/next track.
7. Press the MENU buttons , and then press the
buttons on the remote control to select the desired folder
(if the USB memory device has more than one folder).
8. Press the 3 Button on the remote control to stop
playback.
iPod/iPhone/iPad Operation
Using the iPod/iPhone/iPad dock you can use the unit to
play music files stored on your iPod/iPhone/iPad.
Inserting the iPhone/iPod and Selecting
iPhone/iPod Mode
Press the DOCK button on the remote control or press
FUNCTION button repeatedly on the unit to select
DOCK mode.
1. Press down on the PUSH logo on the docking cover
of the unit to flip the docking cover up.
2. Insert your iPod/iPhone/iPad into the iPod/iPhone/
iPad dock.
/
DVD Microsystem
