Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS OF USE
• Remove the blade block assembly (7) from the inside of the jug (3) and twist in. Then correctly fit it in the
main body (4).
• Pour the food in the jug and place the lid on it. Make sure the blender is perfectly closed and maintain always
held while in use.
• Plug the appliance into the mains.
• Turn the speed selector (5) clockwise to the desired position (1 or 2). The blender will begin to work
maintaining the selected speed.
• It is advisable to begin at the lowest speed of the blender to later raise the highest speed if necessary.
However, and depending on the texture of the food, you may use the highest speed from the beginning.
• The position "PULSE" is ideal to crush the ice. Turn the button and release the selector repeatedly for periods
of about 2 seconds to get crushed ice. For it, we suggest to use little ice cubes, or you can bit them before put
them on the blender, to avoid the "igloo" effect. This means that the crushed ice gets adhered to the blender
walls, and it impede that the other ice cubes arrive to the base to be crushed.
• You may add ingredients to the jug while in use without open the lid. During operation of the mixer, ingredients
may be added without removing the lid. To do this, remove the stopper (1). Slowly add the ingredients through
the opening in the lid and place the cap again.
• Once you have finished, set the speed selector to its "0" position and wait for the blade to stop turning
completely before removing the jug.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• You can remove the blade for cleaning by performing the following steps:
- Place the jar upside down.
- Remove the ring (6) by turning it anti-clockwise.
- Remove the blade block (7).
• The jar, the lid, the cap and the other components of the jar can be cleaned with soap and water, never in the
dishwasher, trying to rinse and dry them well.
• Clean the main body with a slightly damp cloth.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
• Once cleaned, assembly the jar by reversing the above steps and taking the precaution that all components
are in their original position and turn the ring in clockwise direction.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
11
