Idiomas disponibles
Idiomas disponibles
click will be heard indicating the activation of the internal
relay. The icon
screen of the central unit.
•
If the set temperature (SET) is higher than the temperature
in the room (ROOM), the central unit will send a command
to the receiver unit in a maximum of 90 seconds. The
"Heating on" LED on the receiver unit will go out and a click
will be heard indicating the activation of the internal relay.
The icon
Temperature control from the Tuya Smart application
1.
Open the Tuya Smart application and in the list of devices
added to the application, click on the thermostat.
2.
From the settings menu, select the cooling (Cold) or heating
(Heat) mode.
3.
In the thermostat control interface, press the "-" and "+"
buttons to set the desired temperature.
4.
In a maximum of 90 seconds, the application sends the
command via the Internet to the receiver unit, which
confirms by turning on/off the "Heating on" LED and audibly
with a click, which means the activation of the internal relay.
In a short time, the temperature (SET) displayed on the
screen of the central unit will also be updated.
(the cooling system is on) appears on the
disappears from the screen.
13
User manual
