Idiomas disponibles
Idiomas disponibles
INFORMATION FOR DRILL
a.
Secure the workpiece. A workpiece
clamped with clamping devices or in a vice
is held more securely than by hand.
b.
Always wait until the power tool has come
to a complete stop before placing it down.
The drill or driving bit can jam and cause
you to lose control of the power tool.
c.
Switch the power tool off immediately if
the drill or driving bit becomes blocked. Be
prepared for high torque reactions which
cause kickback. The drill or driving bit be-
comes blocked when it becomes jammed
in the workpiece or when the power tool
becomes overloaded.
d.
Use suitable detectors to determine if
there are hidden supply lines or contact the
local utility company for assistance. Con-
tact with electric cables can cause fire and
electric shock. Damaging gas lines can lead
to explosion. Breaking water pipes causes
property damage.
e.
Hold the power tool securely. When tight-
ening and loosening screws be prepared
for temporarily high torque reactions.
f.
In case of damage or improper use of the
battery, vapors may be emitted. The battery
can be set aflame or explode. Ensure the
area is well ventilated and seek medical
attention should you experience any ad-
verse effects. The vapors may irritate the
respiratory system.
g.
Do not open the battery. There is a risk of
short-circuiting.
h.
The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short
circuit may occur, causing the battery to
burn, smoke, explode or overheat.
i.
Only use the battery with products from the
manufacturer. This is the only way in which
you can protect the battery against dan-
gerous overload.
SAFETY WARNING FOR
BATTERY PACK AND
BATTERY CHARGER
•
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
•
Use appliances only with specifically des-
WWW.SENIXTOOLS.COM
ignated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
WARNING!
Use only with SENIX X2 batteries: B20X2 /
B25X2 / B40X2 / B50X2.
•
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or oth-
er small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
•
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns. (This
advice is considered correct for conven-
tional NiMh, NiCd, lead acid and lithium-ion
cell types. If this advice is incorrect for a
cell design that differs from these, then the
correct advice may be substituted.)
•
Do not use a battery pack or charger that
is damaged or modified. Damaged or mod-
ified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk
of injury.
•
Do not expose a battery pack or charger to
fire or excessive temperature. Exposure to
fire or temperature above 266°F(130°C)
may cause explosion.
•
Follow all charging instructions and do not
charge the battery pack or product out-
side of the temperature range specified in
the instructions. Charging improperly or
at temperatures outside of the specified
range may damage the battery and in-
crease the risk of fire.
•
Do not modify or attempt to repair the
product or the battery pack (as applicable)
except as indicated in the instructions for
use and care.
5 - EN
