Idiomas disponibles
Idiomas disponibles
OPERATION
WARNING:
Always wear eye, hearing, hand protection to
reduce the risk of injury when operating the
tool. Keep all parts of your body away from the
rotating bit.
RUNNING DIRECTION
The motor runs forward or backward for
driving the bit in or out. It is controlled by the
direction selector.
WARNING:
Do not change direction of rotation while
chuck is rotating.
Forward
Mode
Driving screws or drilling with drill
Forward
Reverse
Backing out screws or drill bits
Center
Locking the trigger
Lock
EN - 10
Reverse
Application
bits
NOTE:
When changing bits or when the tool is not
in use, the direction selector shall be kept in
"center lock" position to avoid unintended
start.
FUNCTION
Rotate the mode selector so the arrow is
pointing to desire mode.
Mode
Setting
Driving
Drilling
Impact
Drilling
TORQUE
Select a suitable torque value from 1-19 when
in Driving mode on the torque ring. Rotate the
clutch until the arrow points to the desired
torque setting. The driving depth of the
fastener will be limited when the preset torque
is reached.
Application
Driving screws,
bolts.
Drilling in wood
and metal.
Drilling in
masonry.
WWW.SENIXTOOLS.COM
