Idiomas disponibles
Idiomas disponibles
NOTE:
The torque required depends on the type and
size of the fastener to be driven, as well as the
material to be driven into.
SPEED SETTINGS
Mode
Setting
Low
1
High
2
The tool reaches its highest speed when the
selector is set to the "2" setting.
WARNING:
Only switch the speed selector when the
power tool is completely stopped.
WWW.SENIXTOOLS.COM
Application
0-600 RPM
0-2,000 RPM
SWITCHING ON/OFF
1.
Press the trigger to switch on the power
tool. It will stop when the trigger is released.
2.
Applying more pressure to the trigger leads
to faster speeds under current speed set-
ting.
3.
The work light automatically turns on when
trigger is pressed and turns off a few sec-
onds after the tool stops.
HOW TO CHARGE THE
BATTERY PACK
WARNING:
This Lithium-Ion battery pack is shipped
partially charged. Fully charge the battery
pack before using it for the first time.
NOTE:
Charge the battery at an ambient temperature
range of 32°F - 104°F (0°C - 40°C).
1. Charge the Lithium-Ion battery pack only
with the correct charger.
2. Connect the charger to a power supply, the
light indicator of the charger turns red.
3. Align the raised ribs of the battery pack
with the slot in the charger.
4. Insert the battery pack into the charger, the
light indicator of the charger turns green
and it flashes.
5. The charger will communicate with the bat-
tery pack to evaluate the condition of the
battery pack.
6. It is fully charged when the four lights of the
battery turn on. Disconnect the power sup-
11 - EN
