Kesser K-HB-X10 Manual De Instrucciones página 20

Idiomas disponibles
  • ES

Idiomas disponibles

● If the voltage of the electric self-balancing vehicle is too low, the alarm sounds, the player must get
out as soon as possible.
7. using the battery
This section mainly describes the charging method for electric self-balancing vehicles, battery
maintenance, some safety aspects and battery specifications.
To ensure user safety, extend battery life and improve battery performance, please observe the
following instructions for battery use.
7.1 Powering the battery
You must stop driving if the Electric Self-Balancing Vehicle indicates low battery power, as this may
affect the life of the vehicle and lead to dangerous situations.
Do not use the battery if the following occurs:
1. use only the supplied battery pack.
2. smell or overheat.
3. do not touch leaking materials and avoid wetting the battery.
4. children and animals must not touch the battery. 5.
5. the charger must be removed before installation or driving, otherwise it may pose a hazard.
6. the battery contains hazardous substances, do not disassemble the battery or insert anything into the
battery.
7. please use the charger supplied with the electric self-balancing vehicle.
8. do not charge the battery if it is too discharged. It should be disposed of for safety reasons.
9. the battery of the electric self-balancing vehicle should be disposed of according to local laws.
10. please dispose of the used battery in a suitable place and avoid water and fire.
11. charging time must not exceed 12 hours.
12. keep the environment, temperature:-10~40℃, relative humidity:55±20%.
13.In the spare time, keep the battery full current.On the other hand, avoid the battery touch the metal.
7.2 Charging process
Make sure the charging port is dry. 2.
2.Plug the charging cable into the electric self-balancing vehicle, make sure the indicator light is on,
then connect the cable to the power supply (AC100V~240V; 50~60 HZ).
3. the red light indicates that charging has started, otherwise check that the cable is connected.
4. when the light changes from red to green, the battery is fully charged. At this point you should stop
charging as overcharging will affect the life of the battery. 5.
5. use the local standard plug. 6. charge and store the battery.
Charge and store the battery as recommended, otherwise the battery will be damaged. The charging
time is approximately 3 hours. 7.
Keep the charging environment clean and dry. 8.
8. do not insert any objects into the charging port.
7.3 Temperature
The best charging temperature is 25℃. If it is too cold or too hot, the battery will not be fully charged.
7.4 Battery parameters
Battery parameters
Model
Batterietyp
Loading
Voltage
Battery
Operating temperature
Ladetemperatur
Storage
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
20
Battery Parameters
www.eshopping.de
KD3685PA
Lithium-ion
3 hours
36 V
4Ah
-10°C~40°C
0°C~40°C
Within
3
moths:
0°C~35°C
Within 1 year: 25°C
loading