Idiomas disponibles
Idiomas disponibles
16
A. Battery indicator: The green LED light indicates that the electric self-balancing vehicle is fully
charged. the red LED light indicates that the power has dropped to 20%, if the LED light turns red, please
charge it. light turns red, please charge it.
B. Operation LED: When the operator presses the foot switches, the operation LED lights up, indicating
that the system has entered the operation state; when the system has an error in operation, the
operation LED lights up red.
3.3 How to connect Bluetooth
1. press the switch to turn on the scooter.
2. you will hear a sound that means the built-in Bluetooth function is working well.
3. then turn on the Bluetooth of your mobile phone and search for the Bluetooth of the scooter.
4. you will hear a sound again indicating that the Bluetooth of the mobile phone and the scooter are
connected. 5.
Put on some music and test that the Bluetooth speaker works.
3.4 Function of the self-balancing circuit board
1. circuit board installation requirement:aluminium casting near battery,major circuit board connect
switch board.
2. low air warning: when the source voltage was 34V±0.5V, the buzzer alarm will ring, turn on red light
(green light indicator will flash and close, then turn on red light).
3. overspeed warning: in player mode, when the speed is more than 10km/h, the buzzer alarm will
sound.in simple mode, when the speed is more than 8km/h, the buzzer alarm will sound. (Hub motors:8.5
inch).
4. charging indicator:During charging, press the switch turn on the scooter, board pause-off, indicator
flashes (yellow light).
5.Goto start: when the goto start is abnormal, the electric self-balancing vehicle will automatically shut
down in 10s.
6. change mode: The first mode is suitable for players, then you can press the boot button twice to
activate the beginner mode (8km/h).
7. safe protection: the maximum angle is 80°, if the angle is more than 80°, vertical motor and photo-
inductive switching motor both stopped working.
8. motor operation: electric self-balancing vehicles positive speed is the same as negative speed,
according to the circuit board, the angle greater and speed faster.On the other hand, block the light
sensing system of the circuit board, the blue light will turn on.
4. safe use of electric self-balancing vehicles
We hope that every user can drive an electric self-balancing vehicle safely and have fun. You can
remember how you learned to ride a bicycle, drive a car, ski or use other similar means of
transportation; all these experiences can be transferred to our product.
1. Please follow the instructions in the "Product Manual". We strongly recommend that you read the
"Product Manual" carefully before riding the self-balancing electric vehicle for the first time. Before
driving, check whether the tyres are damaged or parts are loose. If there are any abnormalities, please
contact your local dealer. 。
2. Please read the "Product Manual" carefully. It contains a lot of important safety information such as
speed limits, vibration alarm and safety shutdown, etc.
3. do not use the electric self-balancing vehicle improperly to endanger the safety of persons or
property.
4. do not modify any part of the electric self-balancing vehicle as this will affect the performance of the
electric self-balancing vehicle and may cause serious injury.
5. WARNING - Fire hazard - No user serviceable parts.
4.1 User weight restriction
1. The following two points are the reason for a weight restriction:
-------To ensure the safety of the user.
-------To prevent damage due to overloading.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
