During cooking, it is possible to operate in the following ways:
5)
Stirring food: Certain recipes require one or more stirrings during preparation:
to stir, the drawer can be removed from its seat and the contents shaken, taking great
care to avoid overflowing and spilling, which are potentially dangerous given the high
temperature. You can also place the drawer on a surface of inert material (marble, stone,
metal) and use heat-resistant cutlery, not sharp if possible, to stir the contents. When
you are finished, set the drawer back in place and push it in until it clicks and cooking
restarts with the temperature and time remaining and preceding the interruption.
6)
Changing cooking parameters: During cooking it is possible to view the food
from the glass window or during a stirring, as described above. If deemed appropriate
or necessary, you can change the remaining time or the cooking temperature either with
a free cooking program or a pre-set program to improve the result by tapping the N and
P icons, adjusting the value by tapping the L and R icons, as described in FREE COOKING
PROGRAM. The parameters will adapt to the new choices and the process will continue
until the end.
7)
Pause: It is possible to pause cooking without changing the program,
temperature or remaining time: this can be useful if you need to add ingredients during
preparation or want to rearrange the food in the drawer, for example. To pause cooking,
tap the S icon, which starts flashing while the remaining time stops. To resume cooking,
tap the S icon again.
8)
Voluntary program stop: Should you wish to stop the cooking process while
the process is in progress, either because you consider the result satisfactory or because
you wish to program the appliance differently, you can stop it by tapping the S icon for
a few seconds.
AT THE END OF COOKING
Once the remaining time has elapsed, the appliance emits a few consecutive beeps and,
after a short period of idle operation, stops; it is now possible to pull out the drawer and
remove the food. In some cases it is advisable to let it rest for a few moments
immediately after extraction to stop any grease boiling.
Let the appliance rest until it has cooled down considerably, taking care not to come into
contact with hot or incandescent surfaces, whether outside or inside the drawer
compartment. Avoid emptying the drawer by turning it upside down, as the grease trap
grille is not connected to the bottom and therefore it can fall out, creating a hazardous
situation.
29