m DISASSEMBLY INSTRUCTIONS
e How to remove the bottom board and automatic
mechanism plate
1. Fix the tonearm on the rest.
2. Remove the turntable.
3. Close the dust cover, and turn over the unit, taking care
not to scratch it.
4. Remove the bottom board setscrews @ ~ @. Then, the
bottom board can be removed.
(See Fig. 1)
5. Remove the shield plate setscrews
@ and
@.
(See Fig. 2)
6. Remove the regulator transistor P.C.B. setscrew @ .
(See Fig. 2)
7. Remove the earth lead wire setscrew @.
8. Remove the automatic mechanism
plate setscrews
@ ~
@ . Then the automatic mechanism plate can be remov-
ed. (See Fig. 2)
Stop rod
Automatic mechanism plate
e How to remove the stator frame
1. Remove
the bottom
board
and automatic mechanism
plate.
(Refer to "How to remove the bottom board and
automatic mechanism plate''.)
2. Open the "lead holder' of the lead connector and pull
out the lead wire of the arrow (A) in Fig. 3.
3. Remove the stator frame setscrews @ ~ @). Then, the
stator frame can be removed.
(See Fig. 3)
Bottom board
Shield plate
ff
Regulator transistor P.C.B.
Fig. 2
Lead wire
Drive circuit P.C.B.
Fig. 3
Stator frame
