00:00:16.620 GMSG: GWEvent = SOCKET_ACK --> GWState = RegActive
00:00:16.620 GMSG: CCM#0 CPEvent = REGISTER_REQ --> CPState = SentRegister
00:00:16.770 GMSG: CCM#0 CPEvent = CLOSED --> CPState = NoTCPSocket
00:00:16.770 GMSG: GWEvent = DISCONNECT --> GWState = SrchActive
00:00:16.770 GMSG: CCM#1 CPEvent = CONNECT_REQ --> CPState = AttemptingSocket
00:00:16.770 GMSG: Attempting TCP socket with CCM 172.18.112.18
00:00:16.770 GMSG: CCM#1 CPEvent = SOCKET_NACK --> CPState = NoTCPSocket
00:00:16.770 GMSG: GWEvent = DISCONNECT --> GWState = Rollover
00:00:31.700 GMSG: GWEvent = TIMEOUT --> GWState = SrchActive
00:00:31.700 GMSG: CCM#0 CPEvent = CONNECT_REQ --> CPState = AttemptingSocket
00:00:31.700 GMSG: Attempting TCP socket with CCM 172.18.112.17
00:00:31.700 GMSG: CCM#0 CPEvent = SOCKET_ACK --> CPState = BackupCCM
00:00:31.700 GMSG: GWEvent = SOCKET_ACK --> GWState = RegActive
00:00:31.700 GMSG: CCM#0 CPEvent = REGISTER_REQ --> CPState = SentRegister
00:00:31.850 GMSG: CCM#0 CPEvent = CLOSED --> CPState = NoTCPSocket
00:00:31.850 GMSG: GWEvent = DISCONNECT --> GWState = SrchActive
00:00:31.850 GMSG: CCM#1 CPEvent = CONNECT_REQ --> CPState = AttemptingSocket
00:00:31.850 GMSG: Attempting TCP socket with CCM 172.18.112.18
00:00:31.850 GMSG: CCM#1 CPEvent = SOCKET_NACK --> CPState = NoTCPSocket
00:00:31.850 GMSG: GWEvent = DISCONNECT --> GWState = Rollover
El comando show port muestra el puerto Lennon como
resultado:
dtl7-1-cat6000-a (debug-eng) show port 3/4
Port
Name
----- ------------------ ---------- ---------- ------ ----- ------------
3/4
Port
DHCP
MAC-Address
-------- ------- ----------------- --------------- ---------------
3/4
enable
00-01-c9-d8-55-77 10.192.17.109
Port
Call-Manager(s)
-------- ----------------- --------------- --------------- ---------------
3/4
-
Port
DNS-Server(s)
-------- ----------------- -------------------------------------------------
3/4
161.44.15.250*
161.44.21.250
(*): Primary
Port
CallManagerState DSP-Type
-------- ---------------- --------
3/4
notregistered
Port
NoiseRegen NonLinearProcessing
----- ---------- -------------------
3/4
-
-
Port
Trap
IfIndex
-----
--------
-------
3/4
disabled
1265
Otro posible problema de registro puede ser si la información de carga es incorrecta o si el
archivo de carga está dañado. El problema también puede ocurrir si el servidor TFTP no funciona.
En este caso, tracy muestra que el servidor TFTP informa que el archivo no se encuentra:
00:00:07.390 GMSG: CCM#0 CPEvent = REGISTER_REQ --> CPState = SentRegister
00:00:08.010 GMSG: TFTP Request for application load D0041300
00:00:08.010 GMSG: CCM#0 CPEvent = LOADID --> CPState = AppLoadRequest
Status
Vlan
enabled
17
IP-Address
DHCP-Server
TFTP-Server
172.18.112.11
172.18.112.17
Domain
cisco.com
C549
no registrado
Duplex Speed Type
full
- unknown
Subnet-Mask
255.255.255.0
Gateway
10.192.17.254
como se ve en este
