Idiomas disponibles
Idiomas disponibles
Webtec Portable Hydraulic Testers have been designed for easy connection to a hydraulic
circuit so that flow, pressure and temperature can be readily checked. Testers can take full
back pressure up to 210/420/480 bar (3000/6000/7000 psi) depending on the model, and the
built in loading valve enables many of the operating conditions to be simulated. The tester can
be connected anywhere in the hydraulic system to test pumps, motors, valves and cylinders
in both flow directions.
The tester range consists of the following types:
DHT 1 Series Digital Hydraulic Tester
l
HT 2 Series Analogue Hydraulic Tester
l
DHT 2 Series Digital Hydraulic Tester
l
DHM 3 Series Digital Hydraulic Multimeter
l
There are different sizes and porting options to cover a wide range of flows.
This manual covers all testers.
Before first operating the equipment read the whole of these instructions. Safety may be
impaired if they are not followed.
Webtec have been designing and manufacturing flow meters and hydraulics components
for over 40 years. We operate within a Quality Management System that complies with the
requirements of BS EN ISO 9001 which is externally audited and certificated each year.
Beyond compliance to the standard, Webtec is committed to continually improving in everything
we do; with particular emphasis on understanding what matters to our customers and suppliers,
and designing our systems and work to meet their needs. We are always keen to hear from
customer who may have special requirements not covered by our standard ranges.
Introduction
1
