Nave 5308073 Manual Del Usuario página 11

Remote control unit
Replacing the battery
Cleaning and care
Electric shock
▪
Disconnect the mains voltage or mains plug before starting work.
▪
Do not unplug the mains plug by pulling the cable, always take hold of the mains plug directly.
▪
Make sure that no moisture from gets into connection compartments or on live parts.
Non-compliance with these instructions will result in serious or fatal injury.
Damage to the product
▪
Do not use any solvents for cleaning.
Non-compliance with this instruction can cause damage to property.
▪
Use a soft, dry cloth for cleaning.
▪
In case of severe soiling, use a soft and slightly damp cloth to clean the product.
5308073_Manual_16881_03_V1.docx
The remote control works with a button battery, which is included in the
package.
The remote control saves your last setting (memory function). When
turned on again, the last setting is used.
1. ON button: to turn on the product.
2. OFF button: to turn off the product
3. RESET button: to switch from dynamic mode to warm white
temperature mode
4. <--> buttons: to switch to the different color temperatures (7 levels).
5. SPEED buttons: to increase or decrease the speed in flashing mode.
6. FLASH buttons: to switch between warm white to cool white light, in
flashing mode.
7. Dimmer buttons: to switch in dynamic mode to increase or decrease
the brightness (10 levels).
8. Color temperature buttons: to switch to static mode on the different
color temperatures.
DANGER
NOTE
11 / 47