Efco MT 6500 Manual De Instrucciones página 19

Idiomas disponibles

Idiomas disponibles

10 ft
40
OPERATION
Fuel Mixture
38
2-Cycle Engine Oil (25:1) 4%
Gasoline
1 Gallon (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 oz.
1 Liter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 cc (40 ml)
High Quality 2-Cycle Engine Oil (50:1) 2%
Gasoline
1 Gallon (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6 oz.
1 Liter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 cc (20 ml)
39
Filling the Tank (Fig. 39)
WARNING: Follow safety instruction for fuel
handling. Always shut off engine before fueling.
Never add fuel to a machine with a running or hot
engine. Move at least 10 feet (3m) from refueling
site before starting engine (Fig. 38). DO NOT
SMOKE!
1. Clean surface around fuel cap to prevent contamination.
2. Loosen fuel cap slowly.
3. Carefully pour fuel mixture into the tank. Avoid spillage.
4. Prior to replacing the fuel cap, clean and inspect the gasket.
5. Immediately replace fuel cap and hand tighten. Wipe up any
fuel spillage.
NOTE: It is normal for smoke to be emitted from a new
engine during and after first use.
WARNING: Check for fuel leaks, if any are found,
correct before use. Contact a Servicing Dealer if
necessary.
Chain Oil System
The bar and chain require continuous lubrication. Lubrication is
provided by the automatic oiler system when the oil tank is kept
filled. Lack of oil will quickly ruin the bar and chain. Too little oil
will cause overheating shown by smoke coming from the chain
and/or discoloration of the bar. In freezing weather oil will thicken,
making it necessary to thin bar and chain oil with a small amount
(5 to 10%) of Diesel Fuel or kerosene. Bar and chain oil must be
free flowing for the oil system to pump enough oil for adequate
lubrication.
CAUTION: Never use waste oil. Always use
biodegradable lubrificant that is specific for bar
and chain and that is better for the environment and
chainsaw's parts.
CAUTION: Do not use dirty, used or otherwise
contaminated oils. Damage may occur to the oil
pump, bar or chain.
WARNING: Do not use waste oil! Medical studies
have shown that renewed contact with waste oil
can cause skin cancer.
Oil
Oil
(Fig. 40)
en
19
loading