understand its operation.
•
Avoid jumping over obstacles such as kerbs, steps, or
manholes with the electric scooter. Match the speed
and trajectory to those of a pedestrian to cross these
obstacles. It is recommended to get off the electric scooter
when these obstacles become dangerous due to their
height, shape, or slipperiness.
•
Make sure the wheels are not damaged and all parts and
components of the electric scooter are correctly installed
before each use. If you notice any of the parts is loose,
hear strange noises, or the electric scooter does not work
correctly, stop using it immediately and contact the official
Cecotec Technical Support Service.
•
Do not use the electric scooter in a manner that could
damage other objects or other people.
•
It is not allowed to modify the electric scooter in any
manner, as this could alter its performance or damage its
structure and cause harm. Do not use any accessories or
parts not approved by the manufacturer. Do not modify
or tamper with the electric scooter, including the steering
tube and sleeve, power, folding system, and/or braking
system. Any unauthorised change will void the product
guarantee.
•
To prevent the electric scooter from being damaged or
causing an accident, do not use it under water.
•
The electric scooter is not intended to be used by children
from 0 to 16 years old. It can be used by children over the
age of 16, as long as they are given continuous supervision.
Check the current local regulations.
•
This appliance can be used by children aged 16 and above,
and persons with reduced physical, sensory, or mental
capabilities or lack of experience and knowledge, as
10
long as they have been given supervision or instruction
concerning the use of the appliance in a safe way and
understand the hazards involved. Do not allow children to
play with the appliance.
•
Supervise children to prevent them from playing with the
appliance. Close supervision is necessary when the electric
scooter is being used by or near children.
•
Do not modify the braking system, as it could reduce its
safety.
•
Make sure that the mains voltage matches the voltage
stated on the product marking and that the wall outlet is
grounded before charhing the device.
•
Check the charger cord and casing regularly for visible
damage. Do not use the electric scooter if the charger
cord, socket, or structure are damaged, do not work
properly or have fallen, and contact the the official Cecotec
Technical Support Service immediately. If the power cord
is damaged, it must be replaced with a special cord or set
to be supplied by the official Cecotec Technical Support
Service. The power cord is to be properly discarded.
•
When you wish to disconnect the charger, pull from the
plug, never the cord. Do not handle the plug or the electric
scooter with wet hands.
•
Remember that the wheel change is a complicated
process and it is advisable to be carried out by authorised
personnel or by the official Cecotec Technical Support
Service. Damages caused by misuse will void the
guarantee.
•
Check the wheels pressure before each use. Remember
that a low pressure may reduce the battery life.
•
Use this electric scooter only with the power supply
provided with the electric scooter and with original
BONGO SERIE X65
11