Idiomas disponibles
Idiomas disponibles
KNOW YOUR SAW
READ THIS OPERATOR'S
MANUAL AND SAFETY R ULES B EFORE OPERAT-
ING YOUR CHAIN SAW, Compare the illustrations with your unit to familiarize
yourself with the location of the various controls and adjustments. Save this
manual for future reference.
r Too,
"
Hand Guard.---_
A_._. Handle
k
S .or.ope
"NL
.1
t I.,I
I_ /_._
switch
Chain
Muffler _
.
Pdmer
Bar Oil Fill Cap
Housing
Fuel Mix FillCap
Cylinder Cover
Fast Idle
Adjusting
Chain
Screw
Direction
of Travel
Throttle
Choke
}
Bar Clamp Nuts Guide Bar
Tdgger
Knob
Bar Clamp
Chain
Catcher
ON/STOP SWITCH
The ON/STOP Switch is used to stop
the engine.
THROTTLE TRIGGER
The throttle trigger controls engine
speed.
THROTTLE LOCKOUT
The throttle lockout must be pressed
before you can squeeze the throttle trig-
ger. This feature prevents you from ac-
cidentally squeezing the trigger.
FAST IDLE LOCK
The fast idle lock holds the throttle trig-
ger in the starting position, Activate the
fast idle lock by pressing the throttle
lockout and squeezing the throttle trig-
ger. With the throttle trigger squeezed,
press the fast idle lock. Release the
throttle lockout and trigger while holding
the fast idle lock button.
CHOKE KNOB
The Choke Knob activates the choke to
provide additional fuel to the engine
during cold starting.
PRIMER BULB
The Primer Bulbcirculates fuel to the
carburetor to providequicker starting,
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes of operation. You
should check your chain tension fre-
quently. See Chain Tension under the
Service and Adjustments section.
6
