Care And Cleaning - Glacier bay HDQFP1B4227CP Guía De Instalación Y Cuidado

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Operation
3
Checking for low or reduced water pressure
Close (shut off) the water supply to the faucet.
Use wrenches to loosen and remove supply hose.
Rinse the supply hose end with screen filter in a cup of water to flush loose sediment.
Stubborn sediment can be removed with a small brush.
Inspect before re-installing onto the shut off valve.
Use two adjustable wrenches to connect and tighten the supply lines to the supply valves.
Connect the red supply line to the hot water supply valve.
Connect the blue supply line to the cold water supply valve.
CAUTION: Ensure the supply lines do not kink, twist or
bend into a "V" or "L" shape during installation. Do not use
if there are visible signs of damage.
3-1
3-3

Care and Cleaning

To clean, wipe down with a damp cloth and towel dry.
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
3-2
3-4
RED LINE
1
HOT
COLD
8
BLUE LINE
1
2

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Hdqfp1b4227sp10090938951009093889

Tabla de contenido