Controles e indicadores
Control/Indicator Name
1. IGNITION SWITCH
2. DECK ENGAGING
SWITCH (PTO)
3. INDICATOR LIGHTS/
HOURS FUNCTION
METER
4. FUEL CAPS
Control/Indicator Name
5. STEERING SPEED
CONTROL LEVERS
6. PARKING BRAKE LEVER
7. CHOKE CONTROL
8. DECK HEIGHT STOP
9. DECK FOOT PEDAL
10. DECK LOCK HANDLE
11. THROTTLE
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Controls electrical power to the mower. Switch has
three positions: OFF; RUN; START. In OFF position,
no power flows to the mower electrical components. In
RUN position, power flows to all mower electrical
components.
flows to the engine starter.
Controls operation of the mower deck blades.
switch up to engage the mower blades, and push it
down to disengage the mower blades.
Conveys important information to the operator by four
lights that are labeled with icons to indicate (clockwise
from upper left): low battery power; low oil pressure;
parking brake on; and deck engaging (PTO) switch on.
Also, the hours of engine operation is displayed on an
LCD.
Cover fill openings of the right and left fuel tanks.
3
4
2
1
11
10
8
9
Control the speed and direction of the mower. Moving
both levers forward causes the mower to move forward
and moving both levers backward causes the mower to
back up. Moving one lever forward will cause the
mower to turn. The farther the levers are moved
forward or backward, the faster the mower will move
in that direction. The levers may be locked in neutral
position by pushing both levers outward left and right
to their respective farthest points.
Applies the brakes to hold the mower in a stationary
position. Pull the lever up to set the brakes and push it
down to release the brakes.
Causes a rich fuel/air mixture in the carburetor. Used
to start a cold engine and to keep the engine running
until it warms up.
A steel plate used to set the mower deck height.
Raises the mower deck when pushed with your foot.
Locks the mower deck in its highest raised position.
Controls engine speed. Moving the throttle all the way
down sets the engine speed to maximum. Moving the
throttle all the way up sets the engine speed to idle.
9
(Continuación)
Control/Indicator Description
In START position, electrical power
5
4
7
6
Control/Indicator Description
Pull
