Idiomas disponibles
Idiomas disponibles
4.2 External surface cleaning
Body: the external stainless surfaces
should be cleaned with a soft cloth or
sponge and neutral detergent in the
direction of the satin finishing. Avoid steel
wool, scrapers or abrasive, aggressive or
acidic substances which could permanently
damage the stainless steel surfaces.
After cleaning, protect the external surfaces
with specific oil-based products for stainless
steel.
Warning! The data label contains important
and useful information for the technical
assistance service: do not remove it while
cleaning.
Display: for easy cleaning of the glass
display use specific products for glass
surfaces and a soft cloth.
4.3 Inner liner cleaning
Internal cleaning of the liner is necessary
to ensure the hygiene and quality of
processed products, so after each use
it is recommended that you clean the
appliance. The round shape of the
internal parts and the arrangement of the
liner accessories are designed for easy
cleaning, to be carried out with a soft
cloth or non-scratch sponge and neutral
detergent.
Avoid steel wool, scrapers or abrasive,
aggressive or acidic substances which
could permanently damage the stainless
steel surfaces. After cleaning, rinse with
warm water and dry thoroughly.
4.4 Inactivity periods
If the appliance is not being used for an
extended period it is advisable to unplug
it from the power supply and thoroughly
clean both inside and outside following the
instructions in paragraphs 4.2 and 4.3. It
is also advisable to leave the door slightly
open for the entire period of inactivity.
On first reuse, perform the preliminary
cleaning operations described in paragraph
3.2.
5. NON-SCHEDULED
MAINTENANCE
5.1 Malfunctions
Maintenance and/or replacement of any
part of the appliance must be carried out
by qualified and authorized technicians.
Maintenance and/or replacement must
be performed by qualified and authorized
technicians for the lighting system as well.
Note: in case of any malfunction, before
calling the support service, make sure the
power cable is correctly plugged in and that
there is power. If the malfunction persists,
call the support service communicating:
• the data on the data label applied on the
side of the appliance (par. 2.1, fig. 4);
• the date of purchase;
• any visible alarm code on the display.
Note: any attempt to change or repair the
appliance will void the warranty. Rely on
qualified and authorised technicians only.
23
GB
