Idiomas disponibles
Idiomas disponibles
WARNING:
To reduce the risk of fire, electric shock, or injury to persons, read and follow this
entire manual, including the Important Safety Instructions, before operating this washer.
CONTROL
PANEL FEATURES
O
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to turn
the washer OFF.
NOTE: Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be lost.
The door will unlock after a brief pause unless the
water level or temperature is too high.
_)
CYCLE SELECTOR KNOB - START/PAUSE
This knob is a dual-function knob that is used both
to select a cycle and to start or pause a cycle.
Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime
before starting the cycle. (See the cycle guide on
page 14 for allowable settings. To protect your fabrics,
not all settings are allowed in all cycles.)
Press this knob to START the selected cycle. If the
washer is running, use this knob to PAUSE the cycle
without losing the current settings.
NOTE: If you do not start a cycle within 4 minutes of
selecting a cycle, the washer automatically turns off.
MY CYCLE BUTTON
Press MY CYCLE button to select your personalized
cycle. Cycle selections are memorized by pressing
and holding this button for 3 seconds. (See page 21
for details on personalized cycles.)
_I
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the desired cycle options
for the selected cycle. The lights above the buttons
show the current selection. See page 19 for a
complete description.
NOTE: Not all settings are available on all cycle
selections. See chart on page 14 for details.
_1 DELAY BUTTON
Press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by
one hour for up to 12 hours(796.4884*) and 13 hours(796.4885*).
Press the Cycle Selector Knob after the delay is set
to start the delay time.
_I
TIME AND STATUS DISPLAY
The display shows the estimated time remaining, load
size, cycle status, and door lock status. See page 18
for a complete description.
_ICYCLE
OPTION BUTTONS
The option buttons allow you to select additional cycle
options. See page 20 for a complete description.
In addition, pressing and holding the Easy Spin button
for 3 seconds activates the Clean Washer cycle.
_) CANCEL/DRAIN
CYCLE BUTTON
Pressing this button during a cycle will cancel the
cycle. The water in the drum will drain and the controls
will reset to the start-up settings.
12
