FUXTEC RM51SA96 Instrucciones De Uso Originales página 40

Original User Manual FUXTEC FX-RM51SA96_rev03
3
3
ADJUSTING THE CUTTING HEIGHT
Raise the wheels for a low cutting height and lower the reels for a high cutting
height. Adjust the cutting size to your needs centrally using the height adjustment
handle. The middle position is the most suitable position for most lawns.
FILL OIL BEFORE STARTING THE ENGINE
Before each subsequent use, check the oil level and, if necessary, top up with
SAE30 engine oil. Refer to the table in Chapter 2 Product Specification for the filling
quantity.
Your lawnmower is sold without oil.
ATTENTION:
DO NOT overfill the engine with oil. It could lead to the smoke
formation in the muffler when starting.
1) Make sure that the lawnmower is level
2) Remove the dipstick from the oil filler tube
3) Insert the dipstick and pull it out slowly to check the oil level.
IMPORTANT:
- Check the oil level before each use. Add oil if necessary. Fill up to the oil gauge on
40