Idiomas disponibles
Idiomas disponibles
5. INTRODUCTION
This compressor nebulizer is designed to deliver a prescribed medication
solution to treat patient respiratory disorders, such as asthma, allergies and
bronchitis. The nebulizer converts the medication solution into an aerosolized
mist which is inhaled by the patient through the mouthpiece or mask. Read this
manual thoroughly before using the nebulizer and store it for future reference.
6. SPECIFICATIONS
Electrical Requirements
Power Consumption
Rated Current
Dimensions
Weight
Sound Pressure Level
Max. Compression Pressure
Neb. Operating Pressure
Liter Flow Range
Average Nebulization Rate:
Maximum nebulizer solution capacity
Maximum residual medicine volume
Particle size (MMAD)
Operating Temperature/Humidity
Storage/Transport Temperature
Range/ Humidity
Operating and Storage/Transport
Atmospheric Pressure
Protection against electric shock
- Classified as Type
- Type BF applied parts: Mouthpiece, masks
Degree of safety in the presence of flammable anesthetics or oxygen —
No AP/APG (not suitable for use in the presence of flammable anesthetics or
oxygen)
Mode of operation — Continuous
IPX0 — No special protection against harmful ingress of water.
230 V / 50 Hz
Below 60 W
Below 0.70 A
Length 150 mm × Width 140 mm ×
Height 90 mm
1.2 kg (2.64 lbs)
55 dBA
35 psi to 50 psi (241 kpa to 345 kpa)
9-16 psi (62 kpa to 110 kpa)
5-8 L/min
Approx. 0.25 mL/min (6 ml medicine
can be nebulized within 18 minutes)
6 ml
0.5 ml
Approximately 3 μm
+ 10 °C to + 40 °C,
30% RH to 85% RH
- 20 °C to + 70 °C,
10% RH to 95% RH
700 hpa to 1,060 hpa
English 5
