Care; Greasing The Gearbox; Suction Pad - PMA SINGLE-CUT EVO 5.0 Instrucciones De Uso

Care

Greasing the gearbox

When using your Single-Cut regularly it is important to
grease the gearbox on a regular basis. To do this, un-
screw the screws marked in the picture and remove the
housing from the suction pad. Turn the device around
so that you can see into the gearbox. There should be
an even application of grease on the gear wheels.
In the picture on the right, grease should be added.
When screwing the unit together, please note that one
screw is shorter.

Suction pad

Never place your Single-Cut with the suction pad
downwards on dirty or rough surfaces. Should foreign
bodies get stuck in the suction pads, the Single-Cut may
detach.
Please use only clear water and no glass cleaner or
other cleaning agents containing solvents to clean
the suction pad. The use of solvent-based cleaners can
make the surface of the suction disc slippery and less
grippy, so that the Single-Cut can detach from the pad.
EN
PMA/TOOLS AG 15